Hire Products

Martin Rush MH6 Hire
Martin Rush MH6 HireMartin Rush MH6 HireMartin Rush MH6 Hire

Martin Rush MH6 Zoom LED Washlight

The Martin Rush MH6 is an extremely bright LED beam / wash fixture adding moving light functionality to LED engine and zoom system of the hugely popular RUSH PAR 2. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.

  • 12 x 10 W Osram Ostar RGBW LED’s
  • Single-lens wash with fully premixed color
  • 2,000 lumen output
  • 10°–60° zoom
  • 32 pre-built color macros
  • Temperature-controlled cooling system
  • Digital display menu
  • PowerCON in and through
  • 3 and 5-pin DMX options

The Martin Rush MH 6 is available for hire in flight cased sets of 6, but priced individually.

http://www.martin.com/en-us/product-details/rush-mh-6-wash

 

Martin Rush MH6 Wash Tech Specs
Physical
Length: 290 mm 
Width: 189 mm
Height: 360 mm
Weight: 7.1 kg
Dynamic Effects
Pan and tilt speed: Adjustable via onboard control panel and DMX
Color mixing: RGBW
Color presets: 36 color presets plus full white, ‘color wheel’ effects
Electronic dimming: 0 - 100%, four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic 'shutter' effect: Instant open and blackout
Zoom: Motorized
Pan: 540° Tilt: 200°
Control and Programming
Control options: DMX
DMX channels: 14
White balance control: RGB adjustment
16-bit fine control: Dimming, pan and tilt
DMX address setting: Control panel with LCD display
DMX compliance: USITT DMX512/1990
Optics
Light source: 12 x 10 W RGBW Osram Ostar LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Zoom range: 10° - 60°
*Figure obtained under manufacturer's test conditions
Construction
Color: Black, Housing: High-impact flame-retardant thermoplastic, Ingress protection rating: IP20
Installation
Mounting points: One quarter‐turn bracket for rigging clamp
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to illuminated surfaces: 200 mm (8 in.)
Minimum distance to combustible materials: 100 mm (4 in.)
Minimum clearance around fans and vents: 100 mm (4 in.)
Connections
AC power in/thru: Neutrik PowerCon
DMX data in/thru: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Fuse: T 3.15 A
Recommended Miniature Circuit Breaker*: Type D
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
120 V, 60 Hz: 1.3 A, 150 W, PF 0.99
230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Please contact us to enquire about the hire of the Martin Rush MH6 Wash.
Week Hire £36.00 (EX-VAT)
Day Hire £24.00 (EX-VAT)

Enquire about this product today

Yorkshire Lighting, Sound, Video and Staging hire. Equipment is available for collection from our warehouse based in Barnsley South Yorkshire. Delivery is also available for our hire equipment to Leeds, Huddersfield, Wakefield, Sheffield, York, Halifax, Dewsbury, Pontefract, Rotherham, Doncaster, Bradford, Scarborough, Hull, Bridlington, Manchester and surrounding areas. All rental equipment is quoted exclusive of VAT, labour and carriage. Equipment is hired out inline with our terms and conditions of hire. In contacting us and booking a hire you are confirming your acceptance of these terms and conditions.