Hire Products
Martin Rush MH6 Zoom LED Washlight
The Martin Rush MH6 is an extremely bright LED beam / wash fixture adding moving light functionality to LED engine and zoom system of the hugely popular RUSH PAR 2. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.
- 12 x 10 W Osram Ostar RGBW LED’s
- Single-lens wash with fully premixed color
- 2,000 lumen output
- 10°–60° zoom
- 32 pre-built color macros
- Temperature-controlled cooling system
- Digital display menu
- PowerCON in and through
- 3 and 5-pin DMX options
The Martin Rush MH 6 is available for hire in flight cased sets of 6, but priced individually.
http://www.martin.com/en-us/product-details/rush-mh-6-wash
Martin Rush MH6 Wash Tech Specs
Physical
Length: 290 mm
Width: 189 mm
Height: 360 mm
Weight: 7.1 kg
Dynamic Effects
Pan and tilt speed: Adjustable via onboard control panel and DMX
Color mixing: RGBW
Color presets: 36 color presets plus full white, ‘color wheel’ effects
Electronic dimming: 0 - 100%, four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic 'shutter' effect: Instant open and blackout
Zoom: Motorized
Pan: 540° Tilt: 200°
Control and Programming
Control options: DMX
DMX channels: 14
White balance control: RGB adjustment
16-bit fine control: Dimming, pan and tilt
DMX address setting: Control panel with LCD display
DMX compliance: USITT DMX512/1990
Optics
Light source: 12 x 10 W RGBW Osram Ostar LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Zoom range: 10° - 60°
*Figure obtained under manufacturer's test conditions
Construction
Color: Black, Housing: High-impact flame-retardant thermoplastic, Ingress protection rating: IP20
Installation
Mounting points: One quarter?turn bracket for rigging clamp
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to illuminated surfaces: 200 mm (8 in.)
Minimum distance to combustible materials: 100 mm (4 in.)
Minimum clearance around fans and vents: 100 mm (4 in.)
Connections
AC power in/thru: Neutrik PowerCon
DMX data in/thru: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Fuse: T 3.15 A
Recommended Miniature Circuit Breaker*: Type D
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
120 V, 60 Hz: 1.3 A, 150 W, PF 0.99
230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Please contact us to enquire about the hire of the Martin Rush MH6 Wash.
Week Hire
£36.00 (EX-VAT)
Day Hire
£24.00 (EX-VAT)