Hire Products

Martin Rush MH6 CT WHITE Zoom LED Wash / Key light

The RUSH MH 6 Wash CT is designed for key lighting applications within the Performing Arts and Live Stage environments where color temperature control of white light is critical but also a compact and light weight design is desired.

The RUSH MH 6 WASH CT is a bright single-lens LED moving head with fully premixed white color temperatures. With twelve 10W WW/CW (warm white and cold white) LEDs and a 10° to 60° motorized zoom, it offers full electronic dimming and variable strobe effects controlled via DMX. The unit has temperature-controlled fan cooling for quiet operation.

  • 12 x 10 W CWUW LEDs
  • Single-lens wash with fully premixed white
  • 2,000 lumen output
  • 10°–60° zoom
  • Pre Mixed white light from 2700k to 7800K
  • Temperature-controlled cooling system
  • Digital display menu
  • PowerCON in and through
  • 3 and 5-pin DMX options

The Martin Rush MH 6 is available for hire in flight cased sets of 6, but priced individually.

http://www.martin.com/en-us/product-details/rush-mh-6-wash-ct

 

Martin Rush MH6 Wash Tech Specs
Physical
Length: 290 mm 
Width: 189 mm
Height: 360 mm
Weight: 7.1 kg
Dynamic Effects
Pan and tilt speed: Adjustable via onboard control panel and DMX

Color temperature: 2700 K - 7800 K

Color temperature presets: 2700 K to 7800 K in ~100 K steps

Electronic dimming: 0 - 100%, four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic 'shutter' effect: Instant open and blackout
Zoom: Motorized
Pan: 540° Tilt: 200°
Control and Programming
Control options: DMX
DMX channels: 14
16-bit fine control: Dimming, pan and tilt
DMX address setting: Control panel with LCD display
DMX compliance: USITT DMX512/1990
Optics
Light source: 12 x 10 W CWUW LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Zoom range: 10° - 60°
*Figure obtained under manufacturer's test conditions
Construction
Color: Black, Housing: High-impact flame-retardant thermoplastic, Ingress protection rating: IP20
Installation
Mounting points: One quarter?turn bracket for rigging clamp
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to illuminated surfaces: 200 mm (8 in.)
Minimum distance to combustible materials: 100 mm (4 in.)
Minimum clearance around fans and vents: 100 mm (4 in.)
Connections
AC power in/thru: Neutrik PowerCon
DMX data in/thru: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Fuse: T 3.15 A
Recommended Miniature Circuit Breaker*: Type D
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
120 V, 60 Hz: 1.3 A, 150 W, PF 0.99
230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Please contact us to enquire about the hire of the Martin Rush MH6 Wash.
Week Hire £45.00 (EX-VAT)
Day Hire £30.00 (EX-VAT)

Enquire about this product today

Yorkshire Lighting, Sound, Video and Staging hire. Equipment is available for collection from our warehouse based in Barnsley South Yorkshire. Delivery is also available for our hire equipment to Leeds, Huddersfield, Wakefield, Sheffield, York, Halifax, Dewsbury, Pontefract, Rotherham, Doncaster, Bradford, Scarborough, Hull, Bridlington, Manchester and surrounding areas. All rental equipment is quoted exclusive of VAT, labour and carriage. Equipment is hired out inline with our terms and conditions of hire. In contacting us and booking a hire you are confirming your acceptance of these terms and conditions.